R: R: [LARTC] time window in CBQ
Ok, but what about my iproute/tc script for VoiP priorization? Any suggestion?
-----Messaggio originale-----
Da: John McCain [mailto:[email protected]]
Inviato: venerdì 5 settembre 2003 15.44
A: [email protected]
Oggetto: Re: R: [LARTC] time window in CBQ
I must recommend against using G723 unless you are in a very bandwidth starved
but high reliability situation. VOIP is extremely time sensitive, and the latency involved in compression greatly reduces your margin for error. G711
uses more bandwidth (64k per call is a reasonable figure, but it depends on packetization), but will be considerably more forgiving to jitter.
Quoted 7 lines · Catalin BOIE
Quoted 2 lines · Andreani Luca
is 64kbit/sec enough for VoIP ? I would have thought not.. but I do not have VoIP...
Steve, what voip codec do you use?
If you can select, use G723 (6.3 kbit/s)
Quoted 8 lines
Quoted 1 line
/steve
---
Catalin(ux) BOIE
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/